【文/ 快播百科专栏作者 「一夕意相左」】最近,大众新宝来怎么拉高速十分火爆,引起了广泛关注,大众宝来1.4t百公里加速同样备受关注。

大众宝来怎么拉高速

1、更换机油,换完之后行驶数公里,让新机油和发动机充分接触。

2、从1挡开始到3挡,每一个档位从低到高拉起来,每档位适应三到四个转速,最后都维持满转速表4/5左右的转速,每档位分别坚持总时间5分钟即可。3档拉完直接连续升到最高档,松油门让车自然减速后,停车熄火5分钟。

3、1到3档正常开起来,3档时把转速再踩上去后升4档坚持个5分钟,然后再5档,通常大多数的变速箱4或5档拉完就差不多。

4、拉完高速记得马上去换机油。

【英文介绍/For English】:

1. Change the oil, and drive for several kilometers after the change, so that the new oil and the engine are fully contacted.

2. From the 1st gear to the 3rd gear, each gear is pulled up from low to high, each gear is adapted to three to four speeds, and finally maintains the speed of about 4/5 of the full tachometer, and each gear maintains the total speed. The time is 5 minutes. After the 3rd gear is pulled, it will directly rise to the highest gear continuously. After releasing the accelerator to let the car decelerate naturally, stop and turn off the engine for 5 minutes.

3. The 1st to 3rd gears are normally opened. In the 3rd gear, step on the speed again, then increase the 4th gear for 5 minutes, and then go to the 5th gear. Usually, most gearboxes are almost finished with the 4th or 5th gear.

4. Remember to change the oil immediately after pulling high speed.

大众宝来1.4t百公里加速

大众宝来1.4T是一款搭载1.4升涡轮增压引擎的汽车,具有较高的动力性能和经济性。对于这款车的百公里加速表现,我们可以从动力系统、车身重量和传动系统等方面进行了解。

首先,动力方面,大众宝来1.4T搭载的1.4升涡轮增压引擎具有最大功率96kW和最大扭矩220N·m,相比之前的1.6升自然吸气发动机有着更高的性能表现。加之其采用了直喷技术、DOHC配气系统和VVT技术,使得发动机的输出功率更加充沛,百公里加速自然表现更为优秀。

其次是车身重量,大众宝来1.4T的整车重量为约1370kg,相比于其他同级别车型来说还是比较轻的。在加速时,轻量化的车身对于动力输出有着较为显著的提升效果。

最后是传动系统,大众宝来1.4T搭载了6速手动和7速双离合变速器两种变速器,其中7速双离合变速器在换挡时具有更快的响应速度,可以减少换挡时间和动力断档的情况,从而使百公里加速表现更加顺畅。